Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Connect retaining clips to housing halves and engage. Screw in fastening screws -M- for heater/air-conditioning unit housing. - Tightening torque:
1 ftlb.
7. Push on seal -K- over expansion valve. The seal must not show any signs of damage; replace if in doubt.
8. Screw in fastening screws -J- for heater/air-conditioning unit housing. - Tightening torque: 1 ftlb.
9. Screw in fastening screw -I- for air distributor. - Tightening torque: 1 ftlb.
Mounting the fan housing