Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Removing the (C - D) line on the compressor - evaporator
CAUTION:
Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
1. Remove refrigerant by suction.
2. Unscrew refrigerant line fastening screw for the compressor on the pressure damper.
3. Pull the refrigerant line from the connection.
4. Unscrew the fastening screw on the air conditioning compressor.
5. Pull out the refrigerant line from the compressor and remove downwards from the engine area.
Installing compressor-evaporator line
Installing the (A - B) line on the compressor - evaporator
INFORMATION:
-
Always replace the sealing rings of the refrigerant lines.
-
Spray the sealing rings with refrigerant oil before fitting.
-
The compressor - evaporator line can only be installed together with the condenser - evaporator line.