Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Attach the refrigerant lines in the engine compartment to the connections (do not tilt) and screw down using the fastening screws -1-. - Tightening
torque: 9 ftlb.
4. Position refrigerant lines on wheel arch without tension.
5. Position the pressure damper of the compressor - evaporator line and the condenser - evaporator line.
6. Place the three fastening clamps onto the threaded pins and screw down using the three fastening nuts -3-. - Tightening torque: 6 ftlb.
7. Plug in the refrigerant line from the compressor on the pressure damper (do not tilt) and screw down with the fastening screw -1-. - Tightening
torque: 9 ftlb.
8. Engage the refrigerant lines in the holder on the wheel arch, close them, and screw down using the fastening screw -2-. - Tightening torque: 1 ftlb.
9. Engage mount on the refrigerant line.