Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removing And Installing Pressure Switch
Technical values
Preliminary work
1. Remove wiper linkage.
2. Remove cowl panel cover.
Removing pressure switch
INFORMATION: The pressure switch is located in the radiator tank in the direction of travel under the cowl panel cover.
CAUTION:
Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
1. Drain refrigerant.
2. Press release on electrical connector -a- and disconnect from pressure switch.
3. Place one open-ended wrench on the hexagon of the pressure switch and a second open-ended wrench on the hexagon of the refrigerant line.