Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Removing the temperature sensor footwell vent left side
1. Press latch on the electric connector for the sensor -5- and pull off the connector.
2. Turn temperature sensor -5- 90° and remove from the heater/air-conditioning unit.
Temperature sensor for footwell outlet vent, right side
1. Turn temperature sensor by 90° and pull it out of the heater housing.
2. Press latch on connector -arrows a- and pull off connector from the temperature sensor.
Installing temperature sensors/interior temperature sensors on heater
Installing the evaporator temperature sensor
1. Insert the electric connector into the sensor -1- until the connector is felt to engage.
2. Slide in the temperature sensor -1- into the heating/air-conditioning unit and turn 90°.
Installing the intake air temperature sensor
1. Insert the electric connector into the sensor -2- until the connector is felt to engage.