Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1
- Oil pressure sensor adapter
2
- O-ring
3
- Oil pressure sender with temperature sensor
4
- Screw, M6 x 40
5
- Stopper; test connection
6
- Sealing ring
A - Direction of travel
Installing oil pressure sensor
1. Clean all traces of oil from installation location of oil pressure sensor.
Information
Do not turn the oil pressure sensor in the adapter. Risk of breakage!
Do not break off sensor tips! Insert carefully.
2. Move oil pressure sensor (oil pressure sender) with adapter and new sealing rings into installation position -3 and 1-. Position and fit the two
screws -4-.
Oil pressure sensor and oil pressure measuring point
1
- Oil pressure sensor adapter
2
- O-ring
3
- Oil pressure sender with temperature sensor
4
- Screw, M6 x 40 - Tightening torque: 10 Nm (7.5 ftlb.)
5
- Stopper - Tightening torque: 15 Nm (11 ftlb.)
6
- Sealing ring
A - Direction of travel
3. Connect cable plug for oil pressure sensor.
Subsequent work
1. Fit deflection roller between the vibration balancer and generator -1-. Position deflection roller with screw and tighten the screw. Press on lid.