Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Release connector -1- ( -arrows A- ) and pull it off the cornering light bulb -2- ( -arrow B- ).
3. Turn cornering light bulb -1- anti-clockwise -arrow A- and take it out of the main headlight -arrow B-.
Installing halogen bulb
Installing dipped beam halogen bulb
CAUTION:
Danger of injury. Danger of material damage if bulbs are used or handled incorrectly.
-
When installed, the headlight has a high voltage.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
To prevent short circuits, the load in question must be switched off when changing bulbs.
-
New bulbs must be clean and free of grease. Therefore, never touch bulbs with your bare hands. To change the bulbs, use a cloth or soft
paper.
-
Observe the safety instructions when replacing a bulb in a Bi-Xenon headlight.
-
In certain states, it is compulsory to carry spare light bulbs.
1. Insert dipped beam bulb -1- into the bulb holder for the dipped beam headlight -2- ( -arrow- ).