Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Insert bulb holder for auxiliary high beam headlight -1- into the main headlight -arrow A- and turn it clockwise -arrow B-.
3. Fit cover.
3.1. Fit cover -1- down into the guides on the main headlight and swivel it up -arrows A-.
3.2. Press cover -1- onto the main headlight until the two clips engage securely -arrows B-.
Installing cornering light halogen bulb
CAUTION:
Danger of injury. Danger of material damage if bulbs are used or handled incorrectly.
-
When installed, the headlight has a high voltage.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
To prevent short circuits, the load in question must be switched off when changing bulbs.
-
New bulbs must be clean and free of grease. Therefore, never touch bulbs with your bare hands. To change the bulbs, use a cloth or soft
paper.
-
Observe the safety instructions when replacing a bulb in a Bi-Xenon headlight.
-
In certain states, it is compulsory to carry spare light bulbs.
1. Insert cornering light bulb -1- into the main headlight -arrow A- and turn it clockwise -arrow B-.