Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4. Release connector -1- ( -arrow A- ) and pull it off the servo motor for headlight levelling system -2- (-arrow B- ).
Installing servo motor for headlight levelling system
1. Plug in connector -1- on servo motor for headlight levelling system -2- ( -arrow- ) until the connector -1- engages securely.
2. Fit servo motor for headlight levelling system -1- into the main headlight -arrow A- and slide it into the mounting -2- from below -arrow B-.
3. Screw on servo motor for headlight levelling system -2- using the fastening screws -1-. - Tightening torque: 3 Nm (2.0 ftlb.).
4. Fit cover.
4.1. Fit cover -1- down into the guides on the main headlight and swivel it up -arrows A-.