Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Unscrew fastening screw for the mount of the refrigerant lines and open the mount.
7. Detach mount on the refrigerant line.
8. Unscrew fastening screws of both refrigerant lines and pull out the refrigerant line.
9. Carefully unclip the connecting lines from the mount.
10. Lift the vehicle. Hold both refrigerant lines together, twist them, and pull them downward through the left wheel housing opening.
Installing the condenser-evaporator line
Installing the (A - B) line on the condenser - evaporator
INFORMATION:
-
Always replace the sealing rings of the refrigerant lines.
-
Spray the sealing rings with refrigerant oil before fitting.
-
The condenser - evaporator line can only be installed together with the compressor - evaporator line.
1. Insert refrigerant lines -A and B- into the radiator tank, position them, and press them into the retaining clips.