Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Install left front wheel housing liner.
4. Fit left front wheel.
5. Fit engine guard.
6. Fill in refrigerant.
7. Install covers front left (engine compartment cover).
Subsequent work - installing the (C - D) line for the compressor/evaporator
1. Fill in refrigerant.
2. Fit engine guard.
Removing and Installing Suction Line In Vehicle
Removing And Installing Suction Line In Vehicle
Technical values
Preliminary work
1. Remove rear side trim panel.
2. Unscrew auxiliary air-conditioning unit.
Removing suction line in vehicle
CAUTION:
Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
1. Remove refrigerant by suction.
2. Raise the auxiliary air-conditioning unit and unscrew both fastening screws -1-.
3. Remove the suction line -Arrows- and close with plugs.
Installing suction line in vehicle