Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Start the engine and wait until the engine starts up automatically.
1. Loosen rear seat and fold it up. Secure to the headrest using a piece of wire if necessary.
5. Loosen the reinforcement plate for the left seat-belt buckle. To do this, loosen the three fastening screws and twist the plate with the seat-belt
buckle to the side. Do not use the same fastening screws again.
6. Loosen the left cap (figure shows both) -arrows-. To do this, remove the carpeted floor. Then loosen the four fastening nuts and remove the cap.