Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
19. Remove plug connection (Tyco switch) from bracket -Arrow A-.
20. Cut tie-wrap -B-.
21. Release plug connection -Arrow C- and disconnect -Arrows D-.
22. Undo fastening nut -8- and remove line -Arrow A-.
23. Undo fastening nut -9- and remove line -Arrow B-.
24. Unscrew fastening nuts -10- and remove Tyco switch -Arrow C-.
25. Undo fastening nut -11- and remove line -Arrow A-.
26. Release fuse carrier -Arrow B- and remove it from brackets -Arrows C-.
27. Undo fastening nut -12- and remove line -Arrow A-.
28. Undo fastening nuts -13- and remove lines -Arrow B-.
29. Remove floor carpeting from the work area.
30. Cut open tie-wraps -C- and remove the wire harness -Arrows D-.
Installing Central Electrical System Power Distributor
INFORMATION: Always use new self-locking nuts to fasten the lines and retainers.