Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Relay Box: Service and Repair
Removing And Installing Relay Carrier, Plenum Chamber E-Box
Preliminary work
1. Remove ignition key. Disconnect battery. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.
2. Place bonnet in service position.
3. Remove wiper arms.
4. Remove cowl panel cover.
5. Remove left and rear trim panels in engine compartment.
6. Remove radiator tank at front left.
Removing Relay Carrier In Plenum Chamber E-box
1. Undo fastening screws -1- -arrows- and remove lid.
2. Unclip harness -arrow-.