Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Join the plug connection for the main wiring harness together (front left cross member) until it is felt to engage.
Subsequent Work
Installing front apron.
Removing and Installing Main Wiring Harness
Removing And Installing Main Wiring Harness
Technical Values
Removing Main Wiring Harness
Information
INFORMATION:
-
The repair instructions document "Main wire harness" is divided into several chapters because of its size.
-
For body repairs, refer to the specific chapters on installing and removing individual sections of wiring.
CAUTION:
-
The main wire harness contains all airbag lines, antenna lines and optical waveguides.
-
The main wire harness must therefore not be cut for major repair work and must be replaced complete.
-
If individual lines are damaged, isolate them (disconnect, remove plug contacts from plug connections etc.) and replace the original wire harness
by installing new lines.
Removing Main Wiring Harness - Centre Console
Disconnect the battery.
Remove dashboard bracket.
Remove heater/air-conditioning unit.
Remove centre console.