Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
26. Push connector onto angle sensor (wheel suspension) -Arrow A- until locking tabs -B- are felt to engage.
27. Connect plug to washer-fluid reservoir -Arrows A- until locking lug -B- is felt to engage.
28. Insert line into bracket -Arrow C-.
29. Push connector onto headlight housing -Arrow A- until locking tab -B- is felt to engage.
30. Place lines in installation position -Arrows C- and close clips -Arrows D- until locking tabs are felt to engage.
31. Push connector onto airbag sensor -Arrow A- until the latch is felt to engage.
32. Push line and holder onto lock carrier -Arrow B-.
Fit front apron.
33. Connect plug connection to front apron -Arrows A- until locking tab -B- is felt to engage.
34. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tab is felt to engage.