Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
24. Press down the protective cover on the connector (seat belt at C-pillar) -Arrow A- and maintain in this position.
25. Release connector -Arrow B- and disconnect -Arrow C-.
26. Unscrew fastening nut and remove ground strap together with twist lock protection from ground pin.
27. Release connector (cutoff relay for auxiliary battery) -Arrow A- and disconnect -Arrow B-.
28. Undo fastening nuts -2- and remove cutoff relay -arrow-.
29. Turn the cutoff relay, then release the left cover -Arrows A- and open -Arrow B-.
30. Unscrew fastening nut -3- on cutoff relay and remove line from threaded bolt -Arrow C-.
31. Remove line with rubber sleeve from bracket -Arrow D-.
INFORMATION: The retaining pivots -a- are easily broken. So hold the housing firmly when removing the cover.