Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
44. Unclip the line -arrows- (D-pillar lower left).
45. Press down lock on connector (head airbag) -Arrow A- and maintain in this position.
46. Insert connector -Arrow B- until locking tab -C- is felt to engage.
47. Pull line down and through (D-pillar lower left) -Arrow A- and press in rubber sleeve -Arrows B- until it is felt to engage.
48. Clip line on rear cross member -Arrows A-.
49. Push in both connectors -Arrow B- until locking tabs -C- are felt to engage.
50. Insert connector -Arrow A- (D-pillar lower right) until the locking tab -B- is felt to engage.
Lay floor carpeting.
Install left rear light.