Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Unscrew fastening screws -1- and remove the support -2- from the DME control unit -3- ( -arrow- ).
Installing DME control unit
1. Position support -2- on the DME control unit -3- ( -arrow- ) and secure it with the fastening screws -1-.
2. Plug in both connectors -1 and 2- on the DME control unit -3- ( -arrows A- ) and close the latch -arrows B-.
3. Secure DME control unit with support.