Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-401003.png)
2. Insert fastening screw on crankshaft pulse sender and tighten it. - Tightening torque: 10 Nm (7.5 ftlb.)
3. Lay cable for crankshaft pulse sender and press it into the clips. Use a piece of wire, if necessary, to guide the cable plug upwards.
4. Disconnect cable plug on reference mark sender (TDC sender) at the top at the engine cable duct -1-.
Subsequent work
1. Push cable plug into the plastic holder at the rear of the cylinder head (cable plug engages securely). Insert cable plug.
2. Fit engine compartment cover.
3. Fit engine guard.
