Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Accelerator Pedal: Service and Repair
Replacing Accelerator Pedal Module
Technical values
Preliminary work
1. Switch off the ignition.
2. Remove cover under dashboard in the footwell.
3. Remove angle -A- at accelerator pedal module for the lower dashboard cover. To do this, pull the angle out of the guide.
Replacing accelerator pedal
Removing
1. Pull plug connection -B- off the accelerator pedal module.
2. Remove accelerator pedal module. To do this, remove the three fastening screws -C-.
3. Take the accelerator pedal module out of the footwell and remove the pedal cap -D- by pulling it downwards.
Installing