Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-429004.png)
INFORMATION:
-
Absorb any escaping fuel using a suitable binding material or a cloth.
-
Cloths which have absorbed fuel must be disposed of according to the applicable national laws.
-
The fuel system must be depressurised before starting work on it.
-
Only work on the fuel system in well-ventilated rooms.
-
Any seals which have been removed must always be replaced.
-
The tool numbers refer to the individual parts of the tools in the repair kit T10133 and the supplement set T10133/11-15 (unless indicated
otherwise).
-
When replacing injectors, always follow the instructions on mileage and bank-specific replacement.
1. Pull cable plugs off the injectors. -arrows-
2. Remove screw on retainer and remove retainer from the injectors. To do this, use both hands to pull off the retainer against the resistance of the
upper damping rings. Tilt carefully back and forth with a pliers if necessary and remove it.
3. Pull injector out of the cylinder head by hand (use a glove.).
If the injector is stuck in the cylinder head due to coking of the injector tips, proceed as follows:
