Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Removing fuel-pressure regulator for low pressure on DFI engines
1. Disconnect the electric connectors and plug connections for the fuel lines on the right connection unit -1-. Then remove the connection unit
(pressure regulator) completely.
Installing fuel-pressure regulator for low pressure on DFI engines
INFORMATION:
-
The pressure regulator is integrated into the connection unit.
-
The connection unit together with integrated pressure regulator is replaced as a complete unit and not disassembled.
1. Fit a new seal in the opening of the fuel tank.
2. Connect the right connection unit with integrated pressure regulator. -1-