Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4.1. Position covers and secure restraining straps with the M8 screws.
Tighten screws to the specified torque.
-
Tightening torque: 23 Nm (17 ftlb.)
5. Fit heat shields.
5.1. Tighten three M6 collar nuts -3- and one M6 screw -2- to the specified torque.
-
Tightening torque: 10 Nm (7.5 ftlb.)
6. Fit heat shield -1- on cardan shaft.
6.1. Tighten two M6 screws -2- and one M8 collar nut -3- to the specified torque.
-
Tightening torque: 10 Nm (7.5 ftlb.)
-
Tightening torque: 20 Nm (15 ftlb.)