Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Fit cable plugs on the throttle housing and insert cable into the clip.
Subsequent work
INFORMATION:
-
The new throttle valve must be taught when replacing the throttle valve.
-
Conditions: The vehicle is stationary, engine is off, engine temperature is between 5 and 100 degrees C, intake air temperature is more than 5
degrees C, battery voltage is at least 9 volts
-
After replacing the throttle valve, switch on the ignition - but do not press the accelerator pedal - and wait for one minute.
1. Secure intake port on throttle housing.