porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Engine - Oil Leaks From Turbocharger Pressure Hose|Page 2556 > < Engine - Oil Leaks From Turbocharger Pressure Hose|Page 2550
Page 1
background image

Intercooler Duct: Customer Interest
Engine - Oil Leaks From Turbocharger Pressure Hose

1/06 ENU 
2130

Repair Instruction In The Event Of A Complaint Relating To "Oil Leaks" At The Left Turbocharger Pressure Hose

NOTE:

This Technical Information bulletin replaces bulletin Group 2, # 1/06, dated March 7, 2006.

Vehicle Type:

Cayenne Turbo (1st & 2nd Generation)

Model Year:

As of 2003

Concerns:

Pressure hose between turbocharger for cylinder 5-8 and charge air cooler.

INFORMATION:

Complaint relating to "oil leaks"

-

Reduce time and effort involved in establishing the cause

-

Avoid replacing components that are not defective

Turbochargers have been returned to the Warranty Parts Test Center due to a complaint relating to "oil leaks" at the Henn coupling on the pressure hose
between the turbocharger for cylinder 5-8 and the charge air cooler.
Tests on these turbochargers have shown that the turbocharger is not responsible for the presence of oily emulsion in the pressure hose on the
turbocharger.

Depending on operating conditions, oily mist is sprayed out of the crankcase ventilation system into the suction hose in front of the turbocharger for
cylinder 5-8, The oily mist can travel through the turbocharger into the pressure hose (--> Figure 1 -Item A-) between the turbocharger and the charge air
cooler and can settle around the Henn coupling on the pressure hose at the charge air cooler( --> Figure 1 -Circle-)

If there is a leak at the Henn coupling, the oily emulsion will leak out here.

Figure 1 shows how the pressure hose is routed from the turbocharger for cylinder 5-8 to the charge air cooler in the front left wheel housing.

Action Required:

Examine the pressure hose between the turbocharger for cylinder 5-8 (in the left direction of travel) and the charge air cooler for signs of damage.

Depending on what you find, replace either the round seal on the pressure hose or the complete pressure hose.

Parts Info:

955.110.721.00 --> Round seal
955.110.644.00 --> Pressure hose (includes round seal and hose clamp)

Engine - Oil Leaks From Turbocharger Pressure Hose|Page 2556 > < Engine - Oil Leaks From Turbocharger Pressure Hose|Page 2550