Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-457002.png)
CAUTION:
Engine damage and changed exhaust behaviour due to incorrectly mounted knock sensors.
-
The precise tightening torque for the knock-sensor screw must be observed, otherwise the proper function of the knock sensor is not
ensured.
-
The knock sensors must a aligned so that the sensor housing and the cable plug do not touch anywhere, otherwise proper functioning of
the knock sensor is not ensured.
1. Install knock sensors. Make sure that the knock sensors are aligned as shown in the illustration.
2. Tighten fastening screws.
3. Push on cable plug.
Subsequent work
1. Fit the thermostat housing for the two front knock sensors.
2. Fit the starter for the two rear knock sensors.
