Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Air Bag: Service and Repair
Installing Wire Harness For Airbag
Installing Wire Harness For Airbag
Tools
Preliminary Work
Release main wire harness around dashboard area and centre console.
Release main wire harness around the floor area and left-hand side.
Release main wire harness around the floor area and right-hand side.
Release main wire harness in the engine compartment.
Installing Wire Harness For Airbag
WARNING:
Incorrect handling of airbag units.
-
Danger of injury and material damage.
-
Always observe the safety regulations for handling airbag units
-
Remove ignition key. Disconnect battery. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat
frame) is avoided.
-
Before the connector is disconnected from the triggering unit, always wait for 1 minute before disconnecting the battery. The airbag
triggering unit must not be removed with the plug plugged in.