Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6.2. Connect plug connection for the generator -1- ( -arrow B- ) until the generator plug connection -1- engages securely.
7. Install heat shield for generator lines.
7.1. Insert heat shield -1- from above and position it -arrow A-.
7.2. Insert B+ line -4- into the retaining clip -3- ( -arrow B- ) and close the retaining clip -3- ( -arrow C- ).
7.3. Tighten fastening screw -2-. - Tightening torque: 10 Nm (7.5 ftlb.)
7.4. Clip in electric lines for the generator and oxygen sensor at the heat shield -1- ( -arrows D- ).
8. Secure supply connection piece on generator.
8.1. Grease the new seal on the supply connection piece -1- with Vaseline.