Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Remove the side panel cover at the left or right.
2. Release plug connection -a- and disconnect.
3. Pull the trim towards the front and use an open-ended wrench 30 to hold the fastening nut behind the trim tight and screw the socket out.
INFORMATION: Ensure the fastening nut does not fall out behind the trim.
4. Remove the open-ended wrench and hold the fastening nut with the hand.
5. Screw out the socket from the trim. Remove the fastening nut.
Installing socket
Installing passenger's socket