Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-652007.png)
INFORMATION: Only for vehicles with auxiliary battery.
22. Push line for auxiliary battery onto threaded bolt -Arrow A- and screw down with fastening nut -3-. - Tightening torque: 15 ftlb.
23. Close the cover -Arrow B- until locking tabs are felt to engage.
24. Fold up carpeting -arrow-, and place battery ground strap on body and tighten with fastening nut -2-. - Tightening torque: 3.5 ftlb.
CAUTION:
Risk of material damage to screw connections for seat and seat frame.
-
The fastening screws for seat and seat frame are coated and must be replaced after being unscrewed.
-
Before screwing in the new fastening screws, clean the thread holes with an M10 x 1.5 tap.
25. Move seat in folded position backwards -Arrow A- and fold forward -Arrow B-.
26. Screw in fastening screws -1-. - Tightening torque: 33 ftlb.
27. Clip in front seat trim -Arrow C-.
