Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Release both covers -Arrows A- and open them -Arrows B-.
3. Undo both fastening nuts -1- and remove the lines -arrows-.
4. Undo both fastening screws -2- and remove cutoff relay -arrow-.
Installing Cutoff Relay For Auxiliary Battery
1. Position cutoff relay in installation position -arrow- and screw down with the two fastening screws -2-. - Tightening torque: 4.5 ftlb.
2. Place the lines on the threaded bolts -arrows- and tighten with the two fastening nuts -1-. - Tightening torque: 12 ftlb.