Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Wiring Harness: Removal and Replacement
Replacing Wire Harness In Engine Compartment
Replacing Wire Harness In Engine Compartment
Technical Values
Preliminary Work
1. Disconnect battery.
2. Remove linings in engine compartment.
3. Remove front wheel housing liners on the left and right.
4. Remove main headlight at the left and right.
5. Remove front apron.
6. Remove air cleaner housing.
7. Remove coolant expansion tank.
8. Remove filler neck on tank for windscreen washer system.
9. Remove DME control unit.
10. Remove wiper motor.
11. Remove relay carrier in plenum panel E-box.
Removing Wire Harness In Engine Compartment