Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
24. Loosen ground strap for right firewall -32-.
24.1. Screw off fastening nut on the right firewall and remove ground strap together with the twist lock from the threaded bolt -arrow-.
25. Unclip wire harness at the retaining clips -arrow A- and remove rubber sleeve from the bulkhead -arrow B-.
26. Pull off connector on hydraulic unit -33- and remove rubber sleeve -34-.
26.1. Release connector on hydraulic unit -arrow A- and pull it off -arrow B-.
26.2. Unclip wire harness at the retaining clips -arrows C-.
26.3. Remove rubber sleeve on the right firewall in direction of the interior -arrow D- and remove front right wire harness.
27. Screw off ground strap -35- on the centre firewall.
27.1. Screw off the fastening nut on the centre firewall and remove the ground strap with the twist lock -arrow A-.
27.2. Unclip wire harness at the retaining clips -arrow B-.