Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-667018.png)
24. Plug in connector on angle sensor for headlight levelling system at the left and right -16 and 17-.
24.1. Plug in connectors on angle sensor for headlight levelling system -arrow A- until the connectors engage securely.
24.2. Secure wire harness on the left side to the refrigerant line with a new tie-wrap -arrow B-.
25. Plug in connector on TPM transmitter (trigger) -14 and 15- until it engages securely.
26. Clip in wire harness at the retaining clips close to the mounting for the right headlight -arrows-.
27. Clip in wire harness at the retaining clips close to the mounting for the left headlight -arrows-.
28. Secure ground strap for front right cross member -7-.
28.1. Route wire harness and clip it in on the front side member with the retaining clips -arrow A-.
28.2. Push ground straps together with the twist lock onto the threaded bolt on the front side member -arrow B- and screw on the fastening nut. -
Tightening torque: 9 Nm (6.5 ftlb.)
