Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
37. Remove line from rubber sleeve -Arrow E-.
38. Unclip the line -arrow-.
39. Release connector -Arrow A- and disconnect it from the ABS hydraulic unit -Arrow B-.
40. Release clips -Arrow C- , open them -Arrow D- and remove line -Arrow E-.
41. Press out rubber sleeve -Arrow F- and remove line from the passenger compartment.
Remove main wire harness - dashboard area and centre console.
Part 2
Removing And Installing Main Wiring Harness
Technical Values
Installing Main Wiring Harness
Overview