Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
17. Place line (upper side member) in installation position -Arrows A- and close clips -Arrows B- until locking tabs are felt to engage.
18. Fit filler neck of reservoir for windscreen washer system.
19. Push connector onto coolant reservoir -Arrow B- until locking tabs -B- are felt to engage.
20. Push connector onto air flow sensor -Arrow A- until locking tab -B- is felt to engage.
21. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tab is felt to engage.
22. Place line (wheel housing) in installation position -Arrow A- and close clips -Arrow B- until locking tabs are felt to engage.
23. Connect plug connection for ABS sensor and brake pad wear indicator -Arrow C- until locking tabs -D- are felt to engage.
24. Push on connector of lateral acceleration sensor (wheel housing) -Arrow A- until locking tab -B- is felt to engage.
25. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tab is felt to engage.
Only For Vehicles With Automatic Headlight Levelling System