Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Starter Motor: Service and Repair
Removing and Installing Starter
Removing And Installing Starter
Technical values
Preliminary work
1. Before the starter can be removed, the battery must be disconnected and the terminal covered.
2. Remove intake-air distributor.
3. Remove fuel distribution pipe (fuel rail) on DFI engines.
Removing the starter
WARNING:
Risk of damage to starter
-
The battery must be properly disconnected before the electric lines are detached on the starter.
1. Undo electric change-over valve.
1.1. Pull off electric change-over valve -1- from the support -2- ( -arrow A- ) and place to one side with the lines connected.