Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4. Remove the left engine compartment cover.
Removing hydraulic pump (Cayenne Turbo/Cayenne S)
Information
-
The engine does not need to be removed to remove and install the hydraulic pump.
Hydraulic pump (pulley removed)
1. Pull the cover of the throttle body up and off.
2. Remove air box for throttle housing (Y-pipe).
Information
-
Cayenne Turbo only., Before removing the cover of the air cleaner box, the intake manifold of the turbocharger must be disengaged from the air
cleaner housing.
-
Loosen the pulley of the hydraulic pump before removing the drive belt.
3. Remove the left air cleaner housing. To do this, follow Steps 4 and 5 -Air path on Cayenne Turbo (left side)-. Steps 5 to 11 are not relevant for the
Cayenne S.