Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Control Arm Bushing: Service and Repair
Front Suspension
WM 402055 Replacing bearing for trailing arm
Preliminary work
1. Raise the vehicle.
2. Remove lower trailing arm.
General warning notes
Caution:
Increased risk of accidents when working with hydraulic presses - danger of crushing, deformation of components.
-
Risk of injury if the threaded rod in the tubular piston cylinder breaks because of pressure or traction.
-
Possible danger of damage or injury.
-
The worker must always stand away from the direction of pressure or traction on the threaded rod when using the tubular piston cylinder.
-
Position pressure pieces correctly and ensure that they are seated properly.
-
Watch out for falling parts when working with hydraulic presses.
-
Danger of injury and material damage if the wheel carrier is raised incorrectly.
-
Do not damage the brake cover plate.
Caution:
Increased risk of accidents if the wheel carrier is raised improperly!
-
Injuries and material damage are possible.
-
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
-
When raising the suspension, use a suitable intermediate layer (hard rubber).
-
Do not damage the brake cover plate.
Tools and materials