Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6 - Bead seat sealing ring
7 - Valve
Removing wheel electronics
Information
-
For vehicles with a tire pressure monitoring system, the valve and wheel electronics are only replaced in exceptional cases! The following points
can make replacement necessary!
Valve complete with screw -1 to 7- has to be replaced if:
-
The wheel electronics are removed
-
The self-locking -1- fastening screw is loose
-
The bead seat sealing ring -6- is porous or damaged
-
The valve body -7- is bent
-
The union nut -4- is loose.
The wheel electronics -A- must be replaced if:
-
The housing is visibly deformed
-
The filter surface (square, porous section on back of wheel electronics) is so badly soiled that it can no longer be cleaned by wiping
-
Tire sealant (tire sealing liquid) has been used
-
The service life of the battery has expired
-
There is a fault within the wheel electronics.
After removal of the tire, the wheel electronics -A- can be seen at the valve in the outer rim well base.