Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Remove TPM antenna.
2.1.
Release connector -1- (-arrow A-) and pull it off -arrow B-.
2.2.
Unscrew fastening screws -2- and remove TPM antenna -3- (-arrow C-).
Removing TPM antenna
3. Remove support for TPM antenna.
3.1.
Release support -1 and 2- at the locking tabs -arrows A- and remove from the TPM antenna -2- (-arrows B-).
Removing support for TPM antenna
Installing Tire Pressure Monitoring (TPM) antenna
1. Install support for TPM antenna.
1.1.
Push support -1 and 2- onto the TPM antenna -3- (-arrows-) until the locking tabs -arrows- engage securely.
Installing support for TPM antenna
2. Install TPM antenna.
2.1.
Position TPM antenna -3- on the body -arrow A- and screw down with the fastening screws -2-.