Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Installing front wheel bearing
Caution:
Increased danger of accident when handling hydraulic presses.
-
Danger of crushing and material damage if the wheel carrier is raised improperly.
-
Watch out for parts failing when working with the hydraulic cylinder.
-
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
-
When raising the suspension, use a suitable intermediate layer (hard rubber).
-
Do not damage the brake cover plate.
-
Vehicle may not be moved if drive shafts have not been fitted and tightened.
Information
-
The wheel bearing must not come into contact with magnetic objects (e.g., magnetic screwdriver, magnet).
-
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is being raised with a universal vehicle lift. -Dimension X-, from - Control value: 502 mm ±10 mm corresponds to the vehicle position.
-
Visually inspect all parts.
-
Replace self-locking nuts.
-
Replace all expansion screws (screws which are fitted with torque angle tightening procedure).
-
Use correct tightening torques and torque angle.
-
Screws are Dacromet-coated and must not be greased.
-
Make sure the bevel pinions from the ball joints, are clean. Clean with a lint-free cloth as necessary. Do not use cleaning agent.
1. Fit the wheel bearing (tools).