Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Fluid Line/Hose: Service and Repair
WM 386219 Removing and installing line for ATF cooling
Preliminary work
Preliminary work for line for ATF cooling
1. Remove front cardan shaft.
2. Remove engine carrier.
Removing line for ATF cooling
Removing ATF line
Line routing on V8 Turbo DFI
1. Place collecting pan underneath the vehicle.
Warning
Danger of scalding and chemical burns from hot ATF
-
Allow ATF to cool down
-
Wear personal protective gear (goggles, gloves)