Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Line routing on V8 Turbo DFI
1. Install ATF line -1-. When doing this, the line must be fitted above and below the oil line -2- from the turbocharger.
ATF line with oil line constriction
2. Screw in screws securing ATF line to engine oil pan - Tightening torque: 10 Nm (7.5 ftlb.) and to transmission bell housing - Tightening torque:
10 Nm (7.5 ftlb.).
3. Screw in fastening screw -arrow- securing ATF line to ATF thermostat. - Tightening torque: 10 Nm (7.5 ftlb.)
4. Screw in fastening screw securing ATF line to transmission -arrow-. - Tightening torque: 25 Nm (19 ftlb.)
ATF line on transmission
5. Unscrew ATF inspection plug -2- and fill in ATF until a constant discharge is visible at the lifting tube.