Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-498004.png)
Oil drain plug and oil inspection plug
5. Screw in oil inspection plug -2- again with a new sealing ring. - Tightening torque: 70 Nm (52 ftlb.)
Subsequent work
Reworking ATF pan
Information
-
Modified ATF filling capacities in the transmission in combination with new control units.
-
Observe numbers on transmission and control unit.
1. Check and if necessary, top up the ATF.
2. Install shield on ATF pan. To do this, tighten the two fastening screws -arrows-. - Tightening torque: 10 Nm (7.5 ftlb.)
Shield on transmission
3. Fit engine guard.
