Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-509001.png)
Shift Cable: Service and Repair
WM 371519 Removing and installing selector lever cable
Preliminary work for selector lever cable
1. Move selector lever to position D.
2. Remove selector frame.
Removing selector lever cable
Information
-
When a new selector lever cable is used, this should be connected directly to the old cable when it is removed. This ensures that it is routed
correctly.
1. Remove shield on the transmission. To do this, unscrew three fastening screws -arrow-.
Shield to left of transmission
2. Remove tab washer -A- on the cable.
