Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Shifter A/T: Overhaul
WM 371237 Disassembling and assembling cover for selector lever
Preliminary work for cover for selector lever
1. Remove selector knob.
2. Remove cover of center console. To do this, unscrew two screws -arrows on right-, separate plug connection -inset-, tip cover up -curved arrow-
and back, and remove.
Removing center console cover
3. Remove selector lever cover with special tool unlocking hook 9713. To do this hook into the left and right of the unlocking bracket -inset- from
the front and press outwards. Pull the cover upwards slightly at the same time.
Releasing the selector lever cover
4. Release the rear release plates in the same way.
5. Remove selector-lever cover and separate cable connection.