Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Releasing the shade
2. Tip shade up on this side and remove.
Removing the shade
Assembling cover for selector lever
Information
-
Use a clean and soft working surface to disassemble the cover for the selector lever.
1. Before assembly, the printed circuit board is to be inserted correctly -arrows-.
Fastening the printed circuit board
2. The shade must be inserted in the correct position, sliding contact -1- on grinding track -2-.
Position of upper part to lower part
3. Fasten shade on the one side with the retaining lugs -arrows-.