Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-513005.png)
Fitting support for coolant radiator
6. Unscrew oil inspection plug -2- and fill in ATF until a constant discharge is visible at the lifting tube.
Oil drain and inspection plug
7. Screw in oil inspection plug -2-. - Tightening torque: 70 Nm (52 ftlb.)
Oil drain and inspection plug
Subsequent work
Subsequent work for ATF cooler
1. Fasten lock carrier.
2. Install front apron.
3. Check and if necessary, top up the ATF.
4. Fit engine guard.
